Responsibility on a Multi-Employer Job Site

Posted on Friday, July 27, 2018

Let's say you're an electrical contractor. One of your employees bumps into an unoccupied scaffold on a construction site and destabilizes it. Which actions should you take to ensure the safety of employees and avoid liability?

   A. Move everyone out of the way when painters get on the scaffold.
   B. Fix the scaffold.
   C. Warn everyone who is at risk.
   D. Report the incident to the general contractor.

If you answered C and D, you're correct. Responsibility and liability on a job site with several employers depends on each employers role in the project.

In 1999, the Occupational Safety and Health Administration (OSHA) enacted a multi-employer worksite doctrine that bases safety responsibility on the role various employers play on a construction project. In general, employers can be held responsible for employees other than their own and more than one employer can be cited for the same violation.

OSHA identifies four types of employers who are potentially citable for hazardous conditions that violate federal standards:

1. The Exposing Employer is one whose own employees are exposed to a hazard. These employers must exercise "reasonable care" to correct hazards 

    An Example from OSHA:"Employer M" hoists materials onto Floor 8, damaging perimeter guardrails. No worker on the site is exposed to the hazard. Although it lacks authority to fix the guardrails, Employer M takes effective steps to keep all workers, including those of other companies, away from the unprotected edge and informs the controlling employer of the problem. 
    Analysis: Employer M is a creating employer because it caused a hazardous condition by damaging the guardrails. While lacking the power to fix the damage, it took immediate steps to keep all employees away from the hazard and notified the controlling employer. Employer M is not citable since it took measures to prevent employee exposure to the fall hazard.

if they have the authority to fix them. OSHA requires frequent and careful inspection to prevent hazards and to promptly remedy them. What if you don't have the authority to correct a potentially dangerous situation? You must take all feasible measures to minimize employees' exposure and ask another employer to correct the hazard. If there is imminent danger, the exposing employer must remove its employees from the job. 

2. The Creating Employer is the one who caused the hazard. In this case, you must keep all employees -- not just your own -- away from the hazard and notify the employer who controls the work site. If you have the authority to correct the hazard, you must do so promptly. 

3. The Correcting Employer is the one responsible for fixing a hazard. This may be any employer on the site who is authorized to correct the problem. For example, as electrical contractor, you wouldn't be authorized to fix the scaffold in the incident described above, but you would be authorized to correct an electrical hazard. 

4. The Controlling Employer or Manager has authority to manage all the other (exposing, creating and correcting) employers. This employer is citable for failing to prevent, discover or correct a hazard. In the absence of a contractually defined role, the controlling employer is the one exercising supervisory authority over the worksite.

To limit exposure, here are some common-sense rules to follow:

Before anyone picks up a tool, make sure contract terms define the work site responsibilities of the facility owner, contractors and subcontractors. Identify the creating, exposing, correcting and controlling employers. Make certain that actions on the work site conform to the terms. Renegotiate contract terms before doing work outside the scope of the contract.

Pre-qualify subcontractors and screen leased and borrowed employees. Make sure they're adequately trained and outfitted with personal protective equipment.

Remove your employees from areas potentially hazardous to health or safety.

Document your requests when reporting hazards to the controlling employer and asking for corrective action.

Stop work in the event of imminent danger.

Instruct supervisors not to take control of other employers' people or work. Behaviors that imply control can increase your liability.

During an OSHA inspection, do not waive your rights or admit legal liability. Contact your attorney if you have any questions.

Click here for more information from OSHA about its multi-employer citation policy.

Posted in Construction Industry

Disclaimer: The information contained in Dulin, Ward & DeWald’s blog is provided for general educational purposes only and should not be construed as financial or legal advice on any subject matter. Before taking any action based on this information, we strongly encourage you to consult competent legal, accounting or other professional advice about your specific situation. Questions on blog posts may be submitted to your DWD representative.

"Bruner Dental has been with DWD for well over 15 years. The entire team at DWD has been helpful in many ways. From simple questions day to day, to audits, payroll needs, and much more; they…"

Rondell Nelson

Bruner Dental